Product Description

Bona
®
Pro Series Hardwood
Floor Refresher
Technical data sheet
Rev 5/10
This data sheet replaces all previous versions page 1/1
Finishing
Professional formula refresher provides a clear, highly durable gloss to polyurethane finished wood
floors that are dull, worn, scratched, or shows signs of wear. This non - toxic, waterborne formula
restores the beauty of wood floors, leaves no build - up, a nd is recoatable.
Professional Formula
Specially formulated for use on hardwood floors
Restores shine
Easy application
Urethane maintenance coating
Dries in one hour
Non - toxic
Recoatable with finish
GREENGUARD certified for indoor air quality
hour meter
Physical Characteristics:
Ingredients – Water, polymeric resins, Diethylene Gylcol Monoethyl Ether
Color – Milky white (wet)
pH – 8.0
Solids – 10 - 12%
Viscosity – (#4 Ford cup @ 25º C) 10 - 12 seconds
Density – 8.3 9 lb s./gallon (1.0 1 S.G.)
Packaging – 1 quart plastic bottle
Gloss Level – (60º )>80
Odor – Non - Offending
Flash Point – Non - flammable
Stability – 1 year shelf life
VOC – Does not exceed 2%
Application Characteristics:
Drying Time – 1 hour
Application Tools – Bona
®
Microfiber Application Pad
Coverage – 500 sq. ft. per quart
Clarity – Clear when dry
Leveling – Excellent
Percent Cured After 24 hours – 90%
Defoaming – Excellent
Max. cure – 100% after 1 week
All types of unwaxed, r esidential and commercial polyurethane finished wood floors that are dull,
worn, scratched, or show signs of wear
Can be used on most “aluminum oxide” and “ceramic” type UV finishes
BEFORE USING, READ ALL DIRECTIONS AND MATE RIAL SAFETY DATA SHEET.
1. Remove furniture, rugs, etc. Vacuum, sweep or dust mop, then thoroughly clean with Bona
Hardwood Floor Cleaner and the green Microfiber Cleaning Pad on your Bona Mop. Allow the floor
to dry. 2. Gently rock product back and forth to mix. Slightly dampen the cream Microfiber
Applicator Pad with water and attach to mop. Squirt product onto the floor and spread. Work in
sections small enough to keep the Applicator Pad wet. Smooth with the grain. Continue working in
sections until the entire floor is finished. Rinse Applicator Pad with water. 3. Allow to dry at least 1
hour before walking on the floor. For a glossier look, a second coat may be applied after 2 hours.
Allow 24 hours before heavy foot traffic.
Clean - Up: Clean all tools and equipment with warm water.
Maintenance
Directions
Technical data
Recommended Use