Technical data

Bona MiniEdge
Bona AB, Division Sanding
Vallgatan 45, SE-716 31 Fjugesta, Sweden
Tel.: [phone] Fax: [phone]
Bona AB
Box 21074, SE-200 21 Malmö, Sweden
Tel.: [phone]
www.bona.com
EU assurance of conformity
As per directive 2006/42/EC, appendix IIA
We hereby guarantee that Bona MiniEdge with article number:
AMO260000.3 | AMO260001.0 | AMO260001.3 | AMO260003.3
beginning from serial number 1001AMO260001
fulfils the requirements in the Council’s directives:
 2006/42/EC on machines.
 2006/95/EEC regarding electrical equipment intended for use within certain voltage tolerances,
 2004/108/EEC regarding electromagnetic compatibility, including applicable amendments.
The following norms have been used as guidelines when designing the machines:
SS-ISO 2768-1 General tolerances for linear measurements and angle measurements without direct tolerance
specifications.
SS-ISO 1940-1 Balancing requirement of rotors in stable state
- Determination and verification of balancing tolerances
SS-EN ISO 13920 Welding
- General tolerances for welded constructions
- Dimensions for lengths and angles – Form and position
SS-EN ISO 14121-1 Machine safety – Principles for risk assessment
SS-EN ISO 12100 -1,-2 Machine safety – Fundamental terms, general construction principles
SS-EN ISO 13857 Machine safety - Safety distances to prevent hazard zones being reached by upper and lower limbs
SS-ISO 60204-1 Machine safety - Electrical equipment of machines – Part 1: General requirements
SS EN 55014 -1, -2 Electrical household appliances, electrical tools and similar articles
- Electromagnetic compatibility (EMC), Part 1: Emission Part 2: Immunity
SS-EN 61000-3-2 - Electromagnetic compatibility (EMC), Part 3-2: Limits
- Limits for overtones caused by apparatuses with saturation current max. 16 A per phase
SS-EN 61000-6-2 - Electromagnetic compatibility (EMC), Part 6-2: General requirements
- Immunity in equipment in an industrial environment
SS-EN ISO 8062 -1,-3 Geometric product specifications (GPS)
- Dimension tolerances and geometric tolerances for moulding – Part 1: Glossary
- Part 3: Geometric tolerances and machining castings
SMP, The Swedish Machinery Institute
Fyrisborgsgatan 3
SE-754 50 Uppsala
Sweden
has carried out voluntary type approval
certificate no: SEC/09/2148
Fjugesta, 2010-08-16
Lasse Waineby
R&D Manager
Telefon nr: [phone]
Sign:
…………………………………………………………………………….
(The undersigned is authorized to compile the technical documentation)
18