Use and Care Manual

Page | 7
Installation
BONAIRE PORTABLE COOLER
Installation
Unpacking The Unit
Important
When you receive your unit the wheels, remote
and accessory bag will be located inside the
box.
Wheel Assembly
Before installing the wheels the unit MUST be laid
down as shown.
As shown in the picture, lie down the unit carefully and place
the wheel screw end in to the recess under the tank as shown.
Then tighten the wheel in by using the spanner. Once all 4
wheels are assembled then carefully stand up the unit without
damaging a rear filter panel.
Note: Wheels must be locked when operating the unit. To lock
and unlock the wheels please refer the picture.
Press to
Lock
Lift to
Unlock
Spanner