BONAIRE 3 Speed Remote Control Using the Vulcan Comfort Control Suits Models RF 60, 75, 85, 95, 110, 125, 150, 175, 195
Bonaire 3 Speed Radio Frequency Control Operating the Control USING THE EVAPORATIVE AIR CONDITIONER The Vulcan comfort control is a replacement for the Bonaire 3 Speed radio frequency control. Your Vulcan comfort control is designed for use with the BONAIRE RF60 to RF195 Designer Series or the Powerhouse Vulcan central heater. To operate, open the comfort control door and go to the area marked “FUNCTIONS”. All of the evaporative air conditioning functions are printed in blue.
Bonaire 3 Speed Radio Frequency Control Setting up the Timer TURNING “OFF” THE AIR CONDITIONER A) Select the air conditioner functions to operate in timer mode. B) 1 HOUR Press and release TIMER ON ◆ OFF button. OFF will be displayed and the time display will flash 1 hour as shown right. If nothing else is selected within 5 seconds, the 1hour display will count down to zero, one minute at a time. After one hour, the air conditioner will automatically switch OFF.
Bonaire 3 Speed Radio Frequency Control Setup IDENTITY CODE Before the Comfort Control will operate an evaporative ON ◆ OFF air conditioning system, the receiver needs to learn a unique identity code. To transmit an identity code to receiver of the evaporative air conditioner, follow this procedure: • Switch the electricity supply to the heater "OFF" first then "on” again. • Make sure Comfort Control displays "OFF".
