Owner's manual

Multi-Appliance Comfort Control

Navi

atin

the Controls

shows' Fan only from your Heater (when no other appliance

is installed)

MANUAL/AUTO

• Press to select manual thermostat or programmed

operation for heating and manual or thermostat for

evaporative cooling.

ECONOMY/BOOST

• Select economy, boost or normal operating modes.

CLEAN

FILTER/ZONE ABCD

• Press to select the different zones within the house (if

available) or to activate the CLEAN FILTER facility

when in COOL FRESH AIR mode.

SET

TIME/PROGRAM

• Press & release to select the programming options.

• To SET TIME, press and hold the button until TIME is

displayed.

ENTER

• Press and release to save settings when in SET TIME,

PROGRAM mode and ZONE setting.

• Press and release to immediately send instructions.

PRECOOL

• Press & release MANUAL/AUTO and ECONOMY/

BOOST together to access PRECOOL settings.

PRECOOL can be set with the Controller OFF.

RESET

• Press & release SET TIME/PROGRAM and ENTER

simultaneously to reset the unit if RESET is displayed.

Comfort Control - PNE

Page 10