Owner Manual
Integra Owner’s Manual Table of Contents General Information 3 Key Operational Points 4 Opening Windows and Doors 5 Radio Frequency Remote Control 6 Battery replacement 6 Operation Modes 8 Control Functions 9 Turning the Unit ON Turning the) unit OFF Changing the Mode of Operation Changing Comfort Setting Fan Only Operation Cleaning the pads Setting the Timer Setting the Automatic Operating Periods Automatic Operation Overriding the Automatic Operation Power Supply Interruption 11 Configuri
Integra Owner’s Manual CONGRATULATIONS ON YOUR We're delighted you've chosen a Bonaire Fresh Air Conditioner to cool your home. It is an air conditioner we are very proud of. Designed and made in Australia by Climate Technologies, an 100% Australian owned company, it embodies the latest advances in fresh air conditioning technology in a stylish, compact cabinet.
Integra Owner’s Manual KEY OPERATIONAL POINTS Normally during the first 10 days of operation resins are washed from new filter material. A slight odour may be present during this period. Performance of your Bonaire Air-conditioner will improve during this process. 1. BUILDING VENTILATION: Always ensure that adequate windows and doors are open (to allow hot stale air to be expelled from the building). See page (4). 2. TURNING THE UNIT ON: Press the ON/OFF button.
Integra Owner’s Manual OPENING WINDOWS AND DOORS The principal of your unit is to introduce fresh air, which is washed through the filter pads to provided cool fresh air. The air is exhausted taking with it any heat loadings on the home. Exhaust It is essential for successful operation of evaporative air-conditioning that there be sufficient exhaust openings in the area to be ventilated. Open doors and windows will usually provide this.
Integra Owner’s Manual RADIO FREQUENCY REMOTE CONTROL LOCATION OF CONTROLS Access to your Controls To access AUTO, MAN, ECONOMY, FRESH, COOL, PAD CLEAN or TIMER functions the control door has to be opened. To open lift the right side of the door.
Integra Owner’s Manual RADIO FREQUENCY REMOTE CONTROL Page 7
Integra Owner’s Manual OPERATION MODE - MANUAL, AUTO & ECONOMY Your air conditioner can be operated in three different modes either manual, automatic or economy. MANUAL MODE In this mode, you can control the tan and pump settings manually. To select the manual operation press the "MANUAL/AUTO/ECO" button until 'MANUAL' is shown in the display. In manual mode, you can select your desired comfort level by controlling fan speed (12 graduated bars-from LO SPEED to HI SPEED) and pump (FRESH or COOL).
Integra Owner’s Manual Page 9
Integra Owner’s Manual Page 10
Integra Owner’s Manual Power Supply Interruption • The unit will not operate if power supply is interrupted (due to supply failure). In such a case it is possible that the display will still indicate the air conditioner is operating. • When power is restored the air conditioner will be in the OFF mode. • To regain full control of your air conditioner press any button on the hand held Comfort Controller.
Integra Owner’s Manual UNIT MAINTENANCE Warning: Before commencing any maintenance work on your unit, isolate the power at the supply (Fuse Box). Note: It is essential that your evaporative air conditioner is maintained in accordance with this manual. Failure to do so will effect the life of the product and reduce the level of efficiency. Filter Pads Visually check CELDEK pads for damage or blockage. Hose down pads from both sides to remove any build up of salts, dust and pollen.
Integra Owner’s Manual Motor and Fan Check that the fan spins freely and that there is no build up on the blades. Electrical No general maintenance is required to the electrical system. A Qualified Electrician should only carry out electrical connections and maintenance. Bleed Off The bleed rate should be checked to ensure it is adequate and that there is no build up of mineral deposits in or on your air conditioner. White deposits indicate high mineral content and the Bleed Rate should be increased.
Integra Owner’s Manual PROBLEM SOLVING PROBLEM Unit fails to start PROBABLE CAUSE a Black – out b Tripped Circuit Breaker c Blown Fuse d Electrical Fault a Pump Seized b Pump Burnt Out Pump fails to start REMEDY a Wait b Reset c Replace d Call Bonaire Service Agent a Isolate power and then take off top of pump and try to free it. Some lubricant may help.
Integra Owner’s Manual WARRANTY STATEMENT Subject to the following conditions we provide, from the date of purchase, the following warranty: Any part found to be defective in workmanship or material within the period of warranty will be replaced free of charge. The structural warranty covers any structural components within the unit, which fail to perform their intended function due to faulty manufacture or deterioration within the warranty period.
Integra Owner’s Manual Page 16
