OWNER’S MANUAL Home Automation Control Interface www.climatetechnologies.com.
OWNER’S MANUAL Home Automation INTRODUCTION This interface module is designed to interface Climate Technologies technologically advanced Touchpad controller system with most Home Automation systems. From the touch of button to the press of number through your dial up system, your Climate Technologies products can be turned ON or OFF through your home automation system.
OWNER’S MANUAL Home Automation Setup The interface module has been supplied with a 1 metre comms connection cable. • Connect the interface module cable into the comms port on the unit control board. • Connect the Touchpad 20 metre comms Touchpad loom into the plug on the interface module. • Connect the home automation wires to the screw terminals as per the wiring diagram below. • Connect the 9V AC power pack out put plug to the interface module.
Manufactured by: CLIMATE TECHNOLOGIES ABN 13 001 418 042 P/N 5012230/A
