Instruction Manual

Multi-Appliance Comfort Control
Page 33
Controls- Installation / Setup / Commissionin
g
SETTING UP THE CONTROLS – BONAIRE DUCTED REVERSE CYCLE SYSTEM
SETTING THE ZONE AVAILABILITY
The unit default is for all zones to be available. To filter out the zones not being used:
1. Press the ENTER and CLEAN FILTER/ZONE ABCD buttons for 10 seconds pressing the ENTER
button first.
2. Using the ▼ or ▲ buttons select the zone combination required AB, ABC or ABCD.
3. Press ENTER to keep the combination.
Now only the zone combination selected will be available for use when operating the zone requirements.
SETTING THE SYSTEM FAN SPEED
This is not user adjustable and must be set by your dealer during installation
SETTING THE DEFROST CYCLE TYPE
This is not user adjustable and must be set by your dealer during installation
SETTING BOOST HEATING FUNCTION
This is not user adjustable and must be set by your dealer during installation
SETTING THE OUTDOOR UNIT ECONOMY FAN FUNCTION
This is not user adjustable and must be set by your dealer during installation