Instructions / Assembly
7
Step 4 –Attach Center Reflector
to Reflector Panel. Figure 9
■
Remove protective cover
before assembling.Please see
Figure 8
■
Slide two reflector panels
together. Please see Figure
10
■
Insert one small screw and
screw on cap nut loosely.
Please see Figure 10
■
Slide reflector plate onto
reflector panels. Figure 10
■
Insert one small screw and
screw on cap nut loosely.
Figure 10
■
Repeat procedure to complete
the assembly of all four
sections. Fully tighten all of the
screws. Figure 9
Figure 8
WARNING!
Remove protective cover before assemble.
Figure 9
Figure 10
7