Instruction Manual

DOUBLE-SIDED MOUNTING TAPE
BLACK EXTREME
Hannam Hi-tech Co. Ltd.
2. The conditions for good adhesion performance
1) As in section 1, clean the surface before attaching.
2) After removing the liner of the tape, attach it immediately. (minimize exposure time to airborne dust, etc.)
3) Attach it to the object first, and wait until the adhesive performance is maximized. (average 24h , min 1h)
After attaching, wait at least 1 hour
4) Make the surface temperature as warm as possible before attaching. (A hair dryer can be used)
Surface temperature: 25~35℃ (77~95℉) or higher (Enough to feel the warmth)
5) Requires compression after attaching to the fixed surface: 1 inch by 1 inch - 5kg or more - 20 seconds or more
Apply pressure immediately upon attachment.
A push force applied by an adult is sufficient.
6) Attachment Precautions
① Check whether there is a groove in the attachment
Groove depth 0.4mm or less: 1.1T or more applied
Groove depth 1.0mm : 1.1T not applicable, 2.0mm
or more applicable
If the groove depth is more than 1.0 mm, refrain from applying
Immediately
1hour
24 ~ 48 hour
TAPE
Groove
BLACK EXTREME Hannam Hi-Tech - 4 / 7 -