SDS

3M™ Bondo Glass Reinforced Filler, P.N. 270, 271, 272, 272C, 272E, 272ES, 272K, 272T, 272W, 274, 274C, 277 04/17/15
_
_________________________________________________________________________________________
Page 7 of 15
9.1. Information on basic physical and chemical properties
General Physical Form:
Liquid
Specific Physical Form:
Paste
Odor, Color, Grade:
Pungent organic odor. Green.
Odor threshold
No Data Available
pH
No Data Available
Melting point
No Data Available
Boiling Point
293 ºF
Flash Point
88 ºF [Test Method: Closed Cup]
Evaporation rate
<=1 [Ref Std: ETHER=1]
Flammability (solid, gas)
Not Applicable
Flammable Limits(LEL)
1.1 %
Flammable Limits(UEL)
No Data Available
Vapor Pressure
4.5 mmHg
Vapor Density
3.6 [Ref Std: AIR=1]
Vapor Density
No Data Available
Density
1.638 g/ml
Specific Gravity
1.638 [Ref Std: WATER=1]
Solubility In Water
No Data Available
Solubility in Water
Negligible
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water No Data Available
Autoignition temperature No Data Available
Decomposition temperature
No Data Available
Viscosity
No Data Available
Hazardous Air Pollutants
0.27 lb HAPS/lb solids [Test Method: Calculated]
Volatile Organic Compounds
247 g/l [Test Method: calculated SCAQMD rule 443.1]
Volatile Organic Compounds
15.1 % weight [Test Method: calculated per CARB title 2]
Percent volatile
15.1 % weight
VOC Less H2O & Exempt Solvents
247 g/l [Test Method: calculated SCAQMD rule 443.1]
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Heat
Sparks and/or flames