Technical data

4.1.2.2. Use the Music Player
Press the “Selector” button on the front end until you hear the announcement “Audio”. Now
you are in the Audio device.
Attention: If you have pushed “Selector” on M312 and it does not react, it might have been
in sleep mode. In this case just push the “Play” button and it will react. If you still have no
reaction, please check that the keyboard is not locked, volume is on and the battery has
power.
To listen to a music file you need to download it onto Milestone 312. The music file should
be located on your SD memory card. Also possible, but not usual, is to store a music file
on the internal memory. For further information about downloading music to your Milestone
312 please go to “Data management via computer” in this manual.
For a first try select a music file. Therefore navigate through the folder structure as
described under “Navigate through folder structure”. Then start playback by pushing “Play”
in the middle of the keyboard. The same button also has a pause function if you use it
again. If there are only music files and no sub-folders in the actual folder and you do not
press anything after starting the play back, Milestone 312 will automatically play all music
files until it reaches the end of the folder. If it is a mixed folder, also including voice
recordings, Milestone 312 will stop after each voice message.
Attention: Voice recordings and music files should not be mixed up in one folder, because
M312 processes these two file types differently. So depending on the file type M312 would
automatically continue with the next file after a music file and stop immediately with play
back after a voice recording.
You can track to the following or previous file by using the arrow buttons. If you use “Right
arrow” you go to the next song. If you use “Left arrow” once during playback, you jump
back to the start of the current song. If you use it in the first 3 seconds of the play back of a
file, you jump to the previous file. The same happens after 3 seconds of play back when
you quickly press twice “Left arrow” in succession .
The arrow buttons you can also use for scrolling. When you keep the “Right arrow”
pressed, the Music Player will fast-forward after about one second. The speed of scrolling
increases the longer you are pressing the button. When you keep pressing “Left arrow” it
will rewind with the same characteristics. As soon as you stop holding the arrow buttons
normal playback continues.
When you pause the playback, Milestone 312 goes into the sleep mode after a few
minutes and saves the last position of your play back. So when you reactivate Milestone,
the playback resumes from this position and you can continue to listen.
All shortcuts for the Music Player you will also find listed up under the point “Shortcut
overview of Audio”.
!
20/40