Technical data

QuickStart
The fast introduction
into the world of Milestone 312.
With QuickStart you can do some first applications with your Milestone 312. It is structured
in several steps. Step number one describes the outside of the device with its buttons and
connectors. The aim is that you know Milestone‘s outside and the functions of the press
buttons and connectors. In the following steps you have your first examples of using
Milestone 312, and you can play a couple of example files we have pre-installed on your
device.
Preparation
Before we can practice some examples of how to handle Milestone 312 you need to know
the names of the push buttons and where they are located.
On the operator surface you will discover 5 push buttons. The name of the central button is
“Play”. Now we glide down. The next push button is as big as “Play” but has an integrated
X-sign you can feel. This one is the “Mode” button. The remaining three are smaller. If you
go from the central “Play” button to the left, you reach the “Left arrow” button. You will
recognize it because of its arrowhead, which faces to the left. When you go to the right,
starting from the “Play” button, you reach the “Right arrow” button. This one has also an
arrow but it is directed to the right. When you slide up from the “Play” button, you will reach
it, the “Rec” button. This is the highest of these 5 buttons and it has a round indentation in
the centre.
!