Technical data

If you scan the same tag again by pressing “Play”, your spoken message will appear
instead of the acoustic output “New tag found”. Of course you can re-record your
messages for a tag as many times as you want to.
The voice recordings you do with Speakout are stored in a folder with the name
“Speakout” in the internal memory.
Attention: Please be aware that the basic version of Milestone 312 may contain a demo
version of Speakout. This version is limited to handle 3 tags with linked voice records. You
can disable this demo version in the file “CONFIG MILESTONE.TXT“. Further information
about this file you find under “Customize via CONFIG MILESTONE.TXT“ in this manual.
Attention: Please be aware that tags lying upon each other do not work. And please also
note that tags do not work on metal objects except for the metal proof tag TAGRO2.
An overview, including all possible shortcuts of Speakout can be found in the following list.
5.1.3. Shortcut overview of Speakout
Function
Operation
Acoustic feedback
Scanning
“Play”, keep pressed
Crackling sound
Record info message for tag
“Rec” keep pressed
“Click” sound
Listen to a record again
“Play”
Your info message
Erase message for tag
“Mode” + “Play”
Short beep
5.1.4. Get to know some tags
Tags can be delivered as stickers, plastic cards, buttons or rings. The stickers mark
objects permanently. Please do not try to remove a sticker from an object because almost
every time the printed antenna will be destroyed, making the tag useless. Instead, you can
change your voice recording for each tag an unlimited amount of times. This option makes
stickers ideal to tag objects with changing content. Plastic cards, buttons and rings in turn
were designed to move from one target to the next one.
5.1.4.1. Tag square (TAGSQ1), sticker
Side length 40 mm.
This sticker is an all-rounder. Its a compromise between size and
reading range. This tag suits objects with smooth surfaces like
boxes, envelopes, folders, CD covers, sorting boxes, board games,
food boxes and so on.
5.1.4.2. Tag square (TAGSQ2), removable sticker
Side length 55 mm.
This type has a good reading range of up to 4 cm because of its big size.
In addition it is a sticker which you can remove and add more than once.
It is comparable with a Post-it. This tag you can use for similar uses as
TAGSQ1.
5.1.4.3. Laundry buttons (TAGLA1), washable
Diameter 15 mm, size 2 mm.
These buttons are especially suited for clothing. They can be washed up to
!
30/40