Technical data

Interface / KP-232

SerialinterfaceKP232canbeusedasanalternativetocontrolunitKP500.Thisconnection

enables parameterisation, monitoring, setting management, inverter control and even

commissioning from a PC or laptop computer. The serial point-to-point connection between

inverter and PC complies with speciﬁcations for transmission between data terminals (DTE) and

data communication equipment (DCE), requiring, in this mode, a serial pin-to-pin cable with DB9

male connector on the inverter side.

TheKP232interfaceiscompatiblewithlinesnolongerthan15metres.Theserialtransmission

protocol ensures high data security and does not require handshake signals between computer

and inverter.

The VPlus software application can be supplied as an accessory. This program, which runs in Windows,

is dedicated to the complete management of the ACTIVE CUBE inverter from a PC, including the

functions of commissioning and parameterisation, which calls for the presence of hardware interface

KP232,CM232orCM485.TheVPluspackagealsoincludesadigitalOscilloscopeFunction.The

oscilloscope has four traces conﬁgurable for inverter monitoring also with graphic capabilities.

Technical data

Baud rate (kBaud) Up to 115.2 kb

Active Cube

Plug-In

RS232 line

PC/Notebook

KP232