SDS

Bonide Weed Beater Fe Ready To Use
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 09/09/2016
EN (English US)
2/4
First-aid measures after inhalation
:
Assure fresh air breathing. Allow the person to rest. Administer oxygen if breathing is difficult.
Give artificial respiration if person is not breathing.
First-aid measures after skin contact
:
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by
warm water rinse for at least 20 minutes. If skin irritation occurs: Get medical advice/attention.
First-aid measures after eye contact
:
Rinse immediately with plenty of water. Remove contact lenses, if present and easy to do.
Continue rinsing. Obtain medical attention if pain, blinking or redness persist.
First-aid measures after ingestion
:
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries
:
Not expected to present a significant hazard under anticipated conditions of normal use.
4.3. Indication of any immediate medical attention and special treatment needed
No additional information available
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media
:
Regular foam, carbon dioxide, dry chemical or water.
5.2. Special hazards arising from the substance or mixture
Fire hazard
:
None.
5.3. Advice for firefighters
Firefighting instructions
:
No special measures required.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures
:
Use personal protective equipment as required. Do not touch or walk through spilled material. Do
not touch damaged containers or spilled material unless wearing appropriate protective clothing.
Prevent product from entering drains.
6.1.1. For non-emergency personnel
Emergency procedures
:
Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment
:
Equip cleanup crew with proper protection.
Emergency procedures
:
Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up
:
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:
No special precausions are necessary if used correctly.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures
:
Keep container closed in a dry and cool place. Keep in properly labeled containers.
Storage conditions
:
Store in ambient temperature, well-ventilated place away from excessive heat. Keep away from
incompatible materials.
Incompatible materials
:
Aluminum, Zinc, Steel.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Eye/Face Protection: Safety goggles. Face protection shield.
Skin Protection: Wear protective gloves and protective clothing.
Respiratory Protection: Good general ventilation should be sufficient to control worker exposure to airborne contaminants. If not, wear suitable
respiratory equipment.
General: When using do not eat, drink or smoke. Regular cleaning of equipment, work area and clothing is recommended. Do not release into the
environment.