Use and Care Manual

Bonide Poison Ivy & Brush Killer BK-32 Concentrate
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 02/17/2016
EN (English US)
2/5
First-aid measures after skin contact
:
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by
warm water rinse.
First-aid measures after eye contact
:
Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness
persist.
First-aid measures after ingestion
:
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries
:
Not expected to present a significant hazard under anticipated conditions of normal use.
4.3. Indication of any immediate medical attention and special treatment needed
No additional information available
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media
:
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media
:
Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
No additional information available
5.3. Advice for firefighters
Firefighting instructions
:
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire.
Protection during firefighting
:
Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
:
Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment
:
Equip cleanup crew with proper protection.
Emergency procedures
:
Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters.
6.3. Methods and material for containment and cleaning up
For containment
:
Dike spill using absorbant or impervious materials such as earth, sand, or clay. Collect and
contain contaminated absorbant and dike material for disposal.
Methods for cleaning up
:
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:
Wash hands and other exposed areas with mild soap and water before eat, drink or smoke and
when leaving work. Provide good ventilation in process area to prevent formation of vapor.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:
Store in original container. Keep container closed when not in use.
Incompatible products
:
Strong bases. Strong acids.
Incompatible materials
:
Sources of ignition.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No additional information available