BS-210 OPERATING INSTRUCTIONS FCC NOTICE Warning: Adjustment to this unit or replacement of any transmitter component (crystal, semiconductor, etc.) to this unit that could result in a violation of the rules. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
your face and speak in a normal voice, with the antenna pointed up and away from the face. If you wear the handset on your body while using the headset accessory, use only the supplied belt clip for this product and when transmitting, take it out of the belt to ensure that the antenna is at least 1 inch (2.5 centimeters) from your body. Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations.
Press and hold button to transmit. OPERATING INSTRUCTION 1. Turning the unit ON and OFF To turn the unit ON, press and hold the power ON/OFF button far about 2 seconds. To turn the unit OFF, press and hold the power ON/OFF button for about 5 seconds. 2. Sending call tones Press the CALL button once. The unit will send beep tones to the other unit. 3. Transmitting a call Press the hold the PTT button. While holding the PTT button speak in a normal voice about 2 to 3 inches away from the microphone. 4.