User's Manual

Document Number
ENG_TEL_A002
Bonso Group
Rev #
00
Title : BS004 APPROVAL DOCUMENTS
Application :
FCC APPROVAL Release Date : 12 May 2005 Page 34 of 39
Priority Channel Appointment : The BS004 can set the channel user want to use. To select the
Priority Channel Appointment function;
1. Press the button repeatedly until the “PC” appears on the display.
2. Press the and buttons to set the priority channel. An “oF” , “1~22” will appear
on the display during setting.
3. Press the PTT button to save the priority channel.
Monitor Mode : To enable the monitor mode, press the button for 2 seconds. To exit the this
mode , press PTT button or press the button for 2 seconds..
Backlight Display : The BS004’s LCD backlight display automatically lights up for 5 seconds with the
press the button.
Belt Clip :
To install the belt clip:
☞ Slide the clip up into the slot on the back of the radio until the
latching mechanism clicks.
To remove the belt clip:
☞ Pull the latching tab outward, then gently slide the belt clip
down toward the bottom of the radio.