Remote Keyless Entry (BONTEC-T011) BONTEC Co., Ltd.
- INDEX - - An outline - Description of Transmitter and Receiver
FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
An outline of Transmitter and ETACS 1. How to use BONTECBONTEC-T011,R011 - BONTEC-T011,R011 is Remote Keyless System. - This unit control door lock/unlock with wireless. - Lock button push , then door lock. - Unlock button push, then door unlock. - Trunk button push, then Trunk Open - Panic button push, then Panic Alarm 2.
Description of Transmitter and ETACS 1. PRIMARY FUNTION - Remote door lock/unlock - Remote Back Glass Open/panic - LED turn on ( When button is pushed ) - Operating distance : 7~ 10 m - Id input(setting mode) 2. ELECTRICAL CHARACTERISTICS TRANSMITTER RECEIVER Operating voltage 3 VDC 10 ~ 16 VDC Consumption current Max 20mA Max 5mA Operating frequency 3.
4.
5.
* A cause BATTERY IG SW. SET SW. KEYLESS SW. OPERATING MODE SETTING MODE OFF OFF OFF ENABLE DISABLE OFF OFF ON DISABLE DISABLE OFF ON OFF DISABLE DISABLE OFF ON ON DISABLE DISABLE ON OFF OFF DISABLE DISABLE ON OFF ON DISABLE DISABLE ON ON OFF DISABLE DISABLE ON ON ON DISABLE ENABLE 433.92MHz LOCK UNLOCK TRANSMITTER ANTENNA LOCK UNLOCK LOCK / UNLOCK Signal END SETTING RECEIVER R.K.
