User's Manual

OPERATING SUMMARY
1. By the driver of the vehicle, TRNSMITTER's button is pushed.
2. TRANSMITTER sends appropriate CODE by RF frequency.
3. ETACS gets the code and decodes it.
4. When Rx proves it to be the right code, ETACS control Door relay
5. ETACS receive it, and drive the actuator.
The system has the function as follow:
- Whenever DATA is sended to ETACS, LED is turned 'ON'.
1) LOCK & UNLOCK
If LOCK or UNLOCK button is pushed for less than 1 sec, then
TRANSMITTER sends the LOCK or UNLOCK DATA.
2) REAR GLASS OPEN
IF REAR GLASS OPEN button is pushed for less than 1 sec, then
TRANSMITTER sends the Rear Glass open data
3) PANIC
If PANIC button is pushed for more than 2 sec, then
TRANSMITTER sends the PANIC (Burglar alarm)