OWNER’S MANUAL ded rountom bot r fo tilt 1
Congratulations! You are now the proud owner of a BOOMPOD™. Prepare to experience your entertainment on a whole new level. BOOMPOD™ allows you to HEAR the sound and FEEL the excitement. You’ll experience every crash, bang, and boom while enjoying your favorite game, music, or movie. BOOMPOD™ is also a great game seat built to endure the rigors of today’s gaming environment. Take a moment to review your owner’s manual before connecting your BOOMPOD™. If you need further assistance visit us at www.BoomChair.
SET-UP GUIDE The BOOMPOD™ comes with the following: PARTS LIST: 1 1) BOOMPOD™ 2) BATTERY PACK (4 AA, not included) 3a) RCA TO MINI AUDIO CORD 3a 2 (headphone jack to audio left & right channel connectors) 3b 3b) RCA CORD (audio left & right channel connectors) 3c) RCA AUDIO COUPLER 4) DASHBOARD CONTROL PANEL 5) 2x 3 in. (7.62 cm.
ASSEMBLY INSTRUCTIONS BATTERY POWER SUPPLY BACK VIEW Step 1: Unzip battery pocket on back of BOOMPOD™. Step 2: Open battery compartment. Battery Compartment Step 3: Insert 4 “AA” cell batteries (not included). Step 4: Close battery compartment securely. Step 5: Place battery pack in pocket and zip closed. Step 6: Turn BOOMPOD™ on by turning Power knob (A) clockwise.
CONNECTING TO PORTABLE AUDIO / VIDEO DEVICES Step 1: Connect the Red/White ends of RCA cord (3a) into RCA INPUT (B) of BOOMPOD™. Step 2: Plug the single end of the RCA cord (3a) into the headphone jack of your device. Step 3: Turn BOOMPOD™ on by turning Power knob (A) clockwise. Step 4: Turn portable device on. iPod™ * MP3 Player Portable Audio Device PSP™ Nintendo DS™ Portable Game Device 3a * Note: Some Apple™ devices such as iPhone™ or iTouch™ require special 1/8 in. (3.
DAISY CHAINING CHAIRS TOGETHER Note: You will need two RCA “Y” adapters (sold separately) and two RCA cords (3b) to connect two BOOMPODs™ Step 1: Connect single end of first “Y” adapter to RED RCA plug coming from media device. (Fig.1) Step 2: Connect single end of second “Y” adapter to WHITE RCA plug coming from media device. (Fig.2) Step 3: Cord A (Fig.3): Connect RED plug to RED “Y” adapter and WHITE plug to WHITE “Y” adapter. Separate cords as necessary.
TROUBLESHOOTING BOOMPOD™ Q: Why isn’t there sound coming from any of my speakers? A: Ensure your BOOMPOD™ is connected as described in the Setup Guide. Check that batteries are properly installed. Check that the power to the unit is on and the volume is turned up. Also, make sure your audio device is not set to “MUTE” and volume is turned up. Q: Why isn’t there sound coming from one of my speakers? A: Ensure the audio cord to the BOOMPOD™ is securely connected as described in the Setup Guide.
LUMISOURCE, INC. LIMITED WARRANTY LIMITED WARRANTY: LumiSource, Inc. (“LumiSource”) warrants this product against defects in materials and workmanship for a period of ninety (90) days from the date of original consumer purchase.
