User guide

BLUETOOTH CONNECTION TIPS
DAISY CHAINING CHAIRS TOGETHER
Step 1: Connect rst BOOMCHAIR
®
to any media device using the Direct Connection method as described on page 5.
Step 2: Connect one end of 1/8 in. (3.5mm) AUDIO CORD (2b) into OUTPUT of rst BOOMCHAIR
®
.
Step 3: Connect other end of 1/8 in. (3.5mm) AUDIO CORD (2b) into INPUT of second BOOMCHAIR
®
.
Step 4: Repeat steps 2 and 3 starting from second chair to connect more BOOMCHAIRS
®
.
Step 5: Turn all BOOMCHAIRS
®
on by turning POWER SWITCH / VOLUME CONTROL clockwise.
Up to 4 BOOMCHAIRS
®
can be connected when using the direct connection method.
DIRECT CONNECTION
INPUT OUTPUTINPUT OUTPUT
SECOND CHAIR
Connected to First Chair
FIRST CHAIR:
Connected to Media Device
2b
Media Device
Locate Bluetooth Settings on your device
and turn on Bluetooth connection.
On your device list, locate the name
“boomchair” and select for pairing. If you
do not see “boomchair” on you list make
sure the BoomChair
®
is plugged in and
powered on.
The Bluetooth light will be ashing when
searching for a device. Once paired the
blue light will stay on.
If prompted for a passcode enter “0000”
then pair.
POWER
BASS/TREBLE VOLUMEVIBRATION
INPUT OUTPUT
USB CHARGING PORT
VIB OUT