User's Manual

Dongguan Linyar Tech Co., Ltd
Address: Xingye NO.6 Road, Xiabian Industrial Zone, Chang'an Town, Dongguan City, China
Tel: [phone] Fax: [phone] www.linyartech.com
Operation˖
First please activate your mobile phone Bluetooth function, and enter the searching mode.
Power on˖
press
button for 2 seconds, the speaker will power on, you
’ll
hear the
“
power on
”
voice prompt.
Activate Bluetooth pairing˖
The speaker will enter pairing mode automatically if there is no paired
device could connect. If there is a phone was connected you also could
enter pairing mode by press and hold
for 2 seconds.
Power off:
press
button for 3 seconds, the speaker
will power off, you’ll
hear
the
“
aquadpod power off
”
voice prompt.
Select music˖ please press and hold
button for 1second to select next music; please
press and hold
button for 1second to select previous music.
Select volume: press on
button to turn the volume up; and press button to turn
the volume down
Phone answer/hang up: when phone call comes, please press
button to answer the call; when
phone call ended, please press
button again to hang up the call;
please note when phone call comes, continuously press on
button 3
seconds will reject the call.
Active siri or voice control: double press the
button to active siri on IOS system or voice control
on androd system.
Last call re-dial: please double press the
button to re-dial last phone call
Line in function: please us the attached cable to connect the music device and the speaker.
Charging˖ please use the attached USB cable to charge by computer USB port or
other output 5V chargers.
E Reliability Test and Certificates
Reliability testing:
Environmental
testing
Heat resisting
Put in +60
ć
environment for 2 hours, then check if the main body deform
or drop off, check if it can work normally
Cold resisting
Put in -20
ć
environment for 2 hours, then check if the main body deform
or drop off, check if it can work normally