Use and Care Manual

Propane Fire Pit Table Use and Care Manual
Congratulations on purchasing this product. Please follow these guidelines for proper use and
maintenance:
Assembly instructions:
Carefully unpack all components and inspect for any visible damage.
Assemble the fire pit according to the instructions provided, making sure all parts are securely
attached.
Verify that the propane tank compartment is properly installed and secured.
Propane gas connection:
Use only standard 20 pound propane tanks.
Make sure the propane tank is turned off before connecting to the fire pit.
Connect the propane tank according to the instructions provided.
Leak test all connections using a soapy water solution. Do not use an open flame for leak
detection.
To start and operate the fire pit:
Before opening the propane tank, make sure the control knob is in the off position.
Open the propane tank and wait a few seconds for the gas line to pressurize.
Light the fire pit using a long lighter or the built-in ignition button.
Use the control knob to adjust flame height.
Safety instructions:
Keep flammable materials away from fire pits.
Do not leave the fire pit unattended while operating.
Have a fire extinguisher or water source nearby.
Do not use a fire pit in high winds.
Do not use fire pits indoors or in enclosed spaces.
Maintain:
Clean the burner and control room regularly.
Store the fire pit in a dry, covered area when not in use.
Check hoses and connections for wear.
Check the condition of the glass sphere for any cracks or damage.
Troubleshooting:
If you encounter any problems with your fire pit, please refer to the troubleshooting section
in the user manual or contact customer support.
Important tips:
Be sure to follow the manufacturer's instructions for safe use. Failure to do so may result in