Specifications

8
Step 3：Solar Wiring
WARNING: Risk of electric shock! Exercise caution when handling solar wiring.
The solar module(s) high voltage output can cause severe shock or injury. Cover
the solar module(s) from the sun before installing solar wiring.
The TRACER CAN ACCEPT 12V, 24V nominal off-grid solar module arrays.
Grid –tie solar module(s) may be used if the open circuit voltage does not exceed the
maximum solar input rating. The solar module(s) nominal voltage must be equal to or
greater than the nominal battery voltage.
Figure3-4 Solar input wiring
Step 4: Accessories (option)
Install Remote Meter (purchased separately) if required. Refer to the instructions
provided for detailed installation procedures.
Step 5: Confirm Wiring
Double-check the wiring in step1 through 4. Confirm correct polarity at each
connection. Verify that all eight power terminals are tightened.