Specifications

16
Press the Setting Switch, and the led will switch between load 1 timer, load 2 timer
and battery type.
Press the Setting Switch for 5 seconds when the led is on load 1 timer setting. The
led will be flashing. Continue to press the setting switch and the number will repeat
from 0 to 17, and stop pressing when the desired number appears according to the
following setting table.
Setting work mode of load 2 is the same as load 1 when the led is on load 2 timer
setting.
Work Mode of Load
LED
Digital
No.
Dusk to Dawn, Load will be on all night
0
Load will be on for 1 hour after ten minutes delay since sunset
1
Load will be on for 2 hours after ten minutes delay since sunset
2
Load will be on for 3 hours after ten minutes delay since sunset
3
Load will be on for 4 hours after ten minutes delay since sunset
4
Load will be on for 5 hours after ten minutes delay since sunset
5
Load will be on for 6 hours after ten minutes delay since sunset
6
Load will be on for 7 hours after ten minutes delay since sunset
7
Load will be on for 8 hours after ten minutes delay since sunset
8
Load will be on for 9 hours after ten minutes delay since sunset
9
Load will be on for 10 hours after ten minutes delay since sunset
10
Load will be on for 11 hours after ten minutes delay since sunset
11
Load will be on for 12 hours after ten minutes delay since sunset
12
Load will be on for 13hours after ten minutes delay since sunset
13
Load will be on for 14 hours after ten minutes delay since sunset
14
Load will be on for 15 hours after ten minutes delay since sunset
15
Test mode
16
ON/OFF mode
17
Table 4-3 Load Work Mode
Note: There will be 10 minutes delay for the load to turn on after sunset and
to turn off before sunrise. Because the controller requires 10 minutes of delay
before it starts to work. These constraints avoid false transitions due to
lightning or dark storm clouds.