Datasheet

20.02.2020

Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde

Tel.: +49 (0)5223 / 969 - 0 | E-Mail: info@bopla.de | Internet: www.bopla.de

Aluplan

Aluplan AP 5.... enclosure proﬁle set

AP 52025

Order no.: 64052025

* = Available on request.

Characteristics

Colour of enclosure group

Black, similar to RAL 9005

Protection class

IP 65

Enclosure Material

Extruded proﬁles: Al Mg Si 0.5 powder-coated; corners: diecast

zinc ZnAl 4 Cu 1, powder-coated; corner caps: PA-GF 15, corner

seal TPV/TPE; sponge rubber seal (EPDM) in proﬁle groove; for

details see Technical Information

Scope of delivery

2 front proﬁles including seal, 2 side proﬁles including seal, 4

diecast corners, 4 corner seals, 4 covers, 16 screws, 4 rubber

feet. Please order front panels separately.

Note

The smooth outer surface of the front proﬁles can be used to ﬁt

membranes or membrane keypads.

Determination of dimensions for AP 50 proﬁle cuts (special

dimensions):

Length of AP 50 front proﬁle = dim. A – 43 mm

Dimensions

243 x 295 x 56 mm

Product drawing

PAGE 1
Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde Tel.: +49 (0)5223 / 969 - 0 | E-Mail: info@bopla.de | Internet: www.bopla.de Aluplan Aluplan AP 5.... enclosure proﬁle set AP 52025 Order no.: 64052025 * = Available on request. Characteristics Dimensions Colour of enclosure group Dimensions Black, similar to RAL 9005 243 x 295 x 56 mm Protection class IP 65 Enclosure Material Extruded proﬁles: Al Mg Si 0.
PAGE 2
Length of AP 50 side proﬁle = dim. B – 45 mm Important! To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a pressure compensation element. » Additional information Technical documentation / Downloads Technical drawings Product information 3D product data in STEP format: Registration necessary Product drawing in PDF format: 64052025 AP-52025.pdf (109.2 KB) Product drawing in DXF format: 64052025 AP-52025.dxf (704.