User Manual

EN
34
Operation
www.bora.com
6.4.3 Automatic extractor function
INFO The automatic extractor function automatically
adjusts the extraction performance to the
highest power level used on all cooking zones
that are currently in use. If the power level of a
cooking zone is changed, the extractor power is
automatically adjusted.
INFO On induction cooktops there is a 20-second delay
in the power level adjustment and on all other
cooktops there is a 30-second delay.
INFO The automatic extractor function can be disabled
manually at any time.
Permanently activating the automatic extractor
function
see the Menu chapter, menu item 3: Automatic extractor
control
Activating the automatic extractor function for a
cooking session
 Tap the fan button .

The fan symbol lights up blue.

An animation appears on the slider.

A
appears in the 7-segment display.
6.4.4 Switching the fan off
 Swipe downwards to power level 0.
or
 tap until power level 0 is reached.
or
 long press on the fan button .

The automatic after-run function is started.

As soon as the automatic after-run stops, the cooktop
extractor fan is switched off.
6.4.5 Switching off the automatic after-run
early
 Tap the fan button
or
 tap the minus button

The cooktop extractor after-run function is switched
off.
INFO BORA expressly recommends use of the cooktop
extractor after-run function.
6.4.1 Setting the fan power level
The fan power levels can be adjusted in different ways:
 tap on or
 adjustment using the slider
 by tapping a certain position on the slider
 long press on or (adjustment in twos)
Increasing the power level
 Swipe upwards to the required power level
or
 tap until the required power level is reached
or
 tap a higher position on the slider
or
 long press on (power level is increased in twos: 0,
2, 4...)
Reducing the power level
 Swipe downwards to the required power level
or
 tap until the required power level is reached
or
 tap a lower position on the slider
or
 long press on (power level is decreased in twos: ...
4, 2, 0)
6.4.2 Fan power setting
Activating the power setting
 Long press on the slider at position 5
or
 Tap on when power level 5 is active

An animation appears in the slider.

ßp
appears in the display (flashing 3x at first and then
continuous).
INFO After 10 minutes, the power setting is
automatically switched back to power level 5.
Deactivating the power setting
The fan power setting is deactivated early if another
power level is set (see Setting the fan power level).