User Manual
EN
54
Cleaning and Maintenance
www.bora.com
Wipe the igniter electrode [3] and the thermocouple [4]
carefully with a well-wrung-out cloth.
The igniter electrode must not get wet, otherwise the
ignition spark will not light.
Finally, dry the pan supports carefully with a clean
cloth.
Before reassembling the flame openings, burner heads
and burner caps must be completely dry.
Put the burner parts back together again.
Position the burner head [2] correctly on the gas
outlet.
Ensure that the safety thermocouple [4] and the
electric igniter [3] are positioned in the correct
opening.
Position the burner cap [1] so that it fits perfectly,
sitting straight on the burner head [2].
If burner parts are not positioned correctly, the electric
igniter will not work.
Place the pan support straight on the gas burner so it
fits perfectly.
Put the gas burner into operation (see the Operation
chapter).