User's Manual
EN
19
Appliance description
www.bora.com
4.3.1 Model description
Model Long description
CKFI BORA Classic surface induction glass ceramic cooktop
with 2 cooking zones
CKI BORA Classic induction glass ceramic cooktop with 2
cooking zones
CKIW BORA Classic induction glass ceramic wok
CKCH BORA Classic Hyper glass ceramic cooktop with 2
cooking zones 1-ring/2-rings
CKCB BORA Classic HiLight glass ceramic cooktop with 2
cooking zones 1-ring/2-ring/roaster
CKG
BORA Classic gas glass ceramic cooktop with 2 cooking
zones
CKT BORA Classic Tepan stainless steel grill with 2 cooking
zones
Tab. 4.9 Model description
4.3.2 Overview of features and functions
The BORA Classic 2.0 cooktops have the following
features and functions:
Features
CKFI
CKI
CKIW
CKCH
CKCB
CKT
CKG
Electronic power
adjustment
Power setting
*
Egg timer function (short-
time timer)
Automatic ignition and
autom. reignition
Electronic gas adjustment
system (e-gas system)
Cooking functions
Automatic heat up
function
Pan size recognition
Warming
Bridging function
Timer function
Pause function
2-ring additional switching
(rear cooking zone)
Cleaning lock (wipe
function)
Cleaning function
Safety devices
Childproofing feature
Residual heat indicator
Safety shut-down
Overheating protection
Tab. 4.10 Function overview
*only applies to the front cooking zone
INFO If the service life of the activated carbon filter is
exceeded, the correct functioning of the system
may be affected. It is still possible to use the
cooktop extractor, however, all warranty and
guarantee claims shall then be invalid for this
appliance.
INFO Regardless of the filter service indicator, the
components of the grease filter require regular
cleaning (see Cleaning and Maintenance chapter).
4.2.6 USB interface
INFO The USB port is only designed for updates or data
export and only has a power supply for these
processes. It is not possible to charge devices or
carry out other functions.
The system has a USB port. This port is only suitable for
mass storage devices (USB sticks). These USB sticks
must be formatted with the FAT32 data system.
4.2.7 Interface for external devices
The internal interface can be used for extended control
options. This has a Home In and a Home Out contact (see
Installation chapter).
The Home In contact can be used for the signal input
from external switch devices (e.g. window contact
switch).
The Home Out contact can be used to control external
installations.
4.3 Cooktops
INFO The cooktops CKFI, CKI, CKIW, CKCH, CKCB,
CKG and CKT are the variable components for
the BORA Classic 2.0 system and can only be
operated in conjunction with cooktop extractor
CKA2.
INFO You can see exactly which devices have been
installed in your system on the penultimate page
of the Operating instructions (see Identification
plates chapter).