User's Manual
EN
28
Appliance description
www.bora.com
Warming level Safety shut-down after hrs:min
1 (
,
)
08:00
2 (
:
)
08:00
3 (
*
)
08:00
Tab. 4.21 Safety shut-down for warming levels
Switch the cooking zone back on if you want to put
the cooking zone back into operation (see Operation
chapter).
4.4.4 Residual heat indicator
H
If a cooking or grilling zone is still hot after switching off,
there is a risk of burns or fire. Whilst the hot symbol
and
H
are displayed (residual heat indicator), you must
not touch that cooking or grilling zone or place any heat-
sensitive objects on it. After a sufficient cooling period
(< 50 °C) the indicators will go out.
INFO During or after a power cut, the cooktops may
still be hot. In the case of the cooktops CKCH,
CKCB and CKG, no residual heat is displayed after
a power cut, even if they were in use beforehand
and the hobs are still hot.
4.4.5 Overheating protection
INFO If a cooktop overheats, its power is reduced or it
is switched off completely.
INFO If the operating panel overheats, cooktops or the
whole system may be switched off.
The appliances are fitted with overheating protection. The
overheating protection can be triggered if...
... cookware is heated up empty.
... oil or fat is heated on high power.
... a hot cooking zone is switched on again after a power
cut.
... hot cookware heats up the operating panel.
Whilst the overheating protection is active, one of the
following
steps is taken:
The activated power setting is switched back to the
previous level.
The set power level is reduced.
The cooking zone switches off completely.
The cooktop switches off completely.
The system switches off completely.
After a sufficient cooling period, the appliance can be
used again in full.
4.4.6 Childproofing feature
The childproong feature prevents the appliance from
being switched on accidentally or without permission.