Installation Guide

2. Step 2: Insert a screw into the next hole up, then slide another orange bar into position.
Continue this process until all the bars are fitted, being careful that all the notches face down.
Repeat this process for the other side.
Note: Alternative rack positions can be achieved by drilling additional holes where desired using
a 3/32” (2.5mm) drill bit.
3. Step 3: Installing to drywall or other paneled wall sheeting: Locate a solid structural support for
your Portamate Wood Rack is very important. Ensure that you are securely contacting the
center of the wall studs. Distance between the vertical bars is optional. The recommended
distance to support the designed weight capacity is 4 – 6 ft. (120 – 180 cm.) For longer material
or greater weight, multiple wood racks can be used.