User Manual

EN
19
Installation
www.bora.com
321
Fig. 5.12 Insert cooktop
[1] Connections for control knob and automatic extractor
function (front)
[2] Cooktop
[3] Worktop cut-out
 Insert the cooktop [2] into the worktop cut-out [3].
 Align the cooktop [2] exactly.
 For a normal installation, please note that the
connections for the control knobs and the extraction
system [1] are at the front.
INFO The device connection should be at the rear. Use
the cable holders provided.
1
2
Fig. 5.13 Cooktop and height adjustment plates
[1] Cooktop
[2] Height adjustment plates
 If applicable, insert the height adjustment plates [2].
Example bore holes
≥70
90 90 90
Ø50 ±0,5
90 196 196
370 370
110
1 1
Fig. 5.10 Bore holes for 2 cooktops and 1 cooktop extractor
[1] Boreholes for socket (2x external)
[2] Bore holes for control knobs (5x)
[3] Cooktop (2x)
[4] Cooktop extractor
[5] Worktop
[6] Floor unit front panel
≥70
90 90 909090 196 196 196 196
370 370
370
110
1 1 1 1
110
Ø50 ±0,5
Fig. 5.11 Bore holes for 3 cooktops and 2 cooktop extractors
[1] Boreholes for socket (2x external)
[2] Bore holes for control knobs (8x)
[3] Cooktop (3x)
[4] Cooktop extractor (2x)
[5] Worktop
[6] Floor unit front panel
5.5.2 Installing the cooktop
 Please note the position of the cooktop display.
Alternatively, the cooktop can be fitted rotated by
180° (see Installation rotated by 180°).