User Manual

EN
21
Installation
www.bora.com
 Connect the connection on the back of the right
control knob [4] to the “zone 2” connection on the
front of the cooktop [1].
Connecting the cooking zones when the cooktop is
installed rotated by 180°
5 4
3
2
1
7
6
Fig. 5.20 Cooking zone connection in 180° installation
[1] Cooktop
[2] Rear cooking zone (zone 1)
[3] Front cooking zone (zone 2)
[4] Rear cooking zone control knob (zone 1)
[5] Front cooking zone control knob (zone 2)
[6] Front cooktop display (zone 2)
[7] Rear cooktop display (zone 1)
 Connect the connection on the back of the left control
knob [5] to the “zone 2” connection on the back of the
cooktop [1].
 Connect the connection on the back of the right
control knob [4] to the “zone 1” connection on the
back of the cooktop [1].
 Using the configuration menu, set the correct
allocation of the cooking zones in the control
knob display (see Configuration menu, 0° or 180°
installation).
Connecting the automatic extraction system
 Connect the cooktop extractor to the cooktop using the
connector provided for the automatic extraction system.
Connections on the cooktop
321
ZONE1 INTERF. COM1 ZONE2
Fig. 5.18 Connections on the cooktop
[1] Connection of the front cooking zone control knob (zone 1)
[2] Connection of the automatic extraction system
[3] Connection of the rear cooking zone control knob (zone 2)
Standard cooking zone connection
7 6
5
2
1
3
4
Fig. 5.19 Standard cooking zone connection
[1] Cooktop
[2] Rear cooking zone (zone 2)
[3] Rear cooktop display (zone 2)
[4] Front cooktop display (zone 1)
[5] Front cooking zone (zone 1)
[6] Rear cooking zone control knob (zone 2)
[7] Front cooking zone control knob (zone 1)
 Connect the connection on the back of the left control
knob [5] to the “zone 1” connection on the front of the
cooktop [1].