User Manual
EN
25
Installation
www.bora.com
1
2
Abb. 5.24 Cooktop burner with gas burner nozzle
[1] Gas burner
[2] Gas burner nozzle
X
Unscrew the gas burner nozzle [2] from the gas burner [1]
X
Screw the corresponding nozzle for the gas type to be used
into the gas burner [2].
X
Put the burner parts back together again.
X
Position the burner head [2] correctly on the gas outlet.
X
Ensure that the safety thermocouple [4] and the electric
igniter [3] are positioned in the correct opening.
X
Position the burner cap [1] so that it fits perfectly, sitting
straight on the burner head [2].
O
If burner parts are not positioned correctly, the electric igniter
will not work.
X
Place the pan support straight on the gas burner so it fits
perfectly.
X
Set the gas type in the configuration menu (see point 5.8.4
“Configuration of gas type and gas pressure”).
Affixing the nozzle set nameplates
X
Affix the nozzle set nameplates included in the scope of
delivery in the corresponding space over the nozzle set
nameplate on the bottom of the cooktop and on the back of
these operating and installation instructions.
Abb. 5.25 Axing the nozzle set nameplates
5.8 Installing the cooktops
i
Clearance of one millimetre should be planned between
the built-in appliances.
i
A clearance of two millimetres should be planned around
the built-in appliances.
i
It is recommended to install a mounting rail between
adjacent cooktops (mounting rail PZMS available as an
accessory).
i
The cooktop can also be installed rotated by 180°.
5.8.1 Installing the cooktop
Inserting the cooktop (ports on the front)
321
Abb. 5.26 Inserting the cooktop
[1] Control knob port and cooktop extractor interface (front)
[2] Cooktop
[3] Worktop cut-out
X
Insert the cooktop [2] into the worktop cut-out [3].
X
Align the cooktop [2] exactly.
X
For a normal installation, please note that the ports for the
control knobs and the automatic extractor function [1] are at
the front.
i
The connection cables should be guided to the rear. Use
the cable holders provided.
Levelling the cooktop (if necessary)
1
2
Abb. 5.27 Cooktop and height adjustment plates
[1] Cooktop
[2] Height adjustment plates
X
If applicable, insert the height adjustment plates [2].