Installation and Operation Guide

EN
24
Installation
www.bora.com
Availability of the pause function
If you have confirmed menu item
C
9
, you can
permanently deactivate the pause function.
Setting Pause function available/deactivated
C
9
0
Pause function activated Factory default
C
9
1
Pause function deactivated
C
9
2
Pause function with power display activated
Tab. 5.9 Availability of the pause function
5.6.3 Changing the set value
 Turn the selector ring clockwise to increase the value.
 Turn the selector ring anti-clockwise to reduce the
value.
 Tap the touch-operated area to confirm the new value.
The value is saved and an acoustic signal sounds.
The previously selected menu item reappears on the
control knob display.
5.6.4 Exiting the configuration menu
 Turn the selector ring until
C
appears on the display.
 Now tap the touch-operated area to exit the
configuration menu. The display goes out and an
acoustic signal sounds.
 Turn the selector ring to the 12 o’clock position.
0
appears on the display for 10 seconds. The display
then goes out and an acoustic signal sounds.
INFO If no settings are made in a menu or submenu
item for 2 minutes, the device automatically
exits the configuration menu.
5.7 Handover to user
Once installation is complete:
 Explain the main functions to the user.
 Explain all safety-related aspects of operation and
handling to the user.
 Stick the supplied nameplate to the back of these
operating and installation instructions.
 Provide the user with the accessories and operating
and installation instructions to be kept in a safe place.