User's Manual

EN
10
Safety
www.bora.com
2.3 Safety instructions – Cooktop
extractor
Do not place any hot cookware on the air inlet
nozzle of the cooktop extractor.
Make sure that hot cookware does not touch
the edge of the air inlet nozzle.
DANGER!
Risk of smoke inhalation!
Using a replace that depends on the
air in the room produces combustion
gases.
If the cooktop extractor is used in
conjunction with a replace that
depends on the air in the room, toxic
combustion gases (carbon monoxide)
can be extracted from the chimney or
outlet duct into the living area.
Make sure that there is always a
sufficient air supply.
DANGER!
Fire risk from flambéing!
While the cooktop extractor is working,
it sucks up grease from cooking.
Flambéing food can cause the grease
to catch re.
Clean the cooktop extractor
regularly.
Never work with a naked flame while
the cooktop extractor is running.
DANGER!
Fire risk from fat deposits!
If the stainless steel grease lter is
not cleaned regularly, this can lead to
increased levels of grease in it. This
increases the re risk.
Clean and replace the filter at
regular intervals.
CAUTION!
Exposed parts may become hot!
The cooktop extractor and its exposed
parts are hot when the cooking zone
is switched on and during the cooling
phase.
Please use suitable tools (pot
holders, oven gloves).
WARNING!
Risk of injury when opening the
bottom housing cover!
There is a risk of injury while the fan is
turning.
Switch off the cooktop extractor and
the cooktop.
Turn off the mains supply.
CAUTION!
Damage caused by objects or paper
suctioned in!
Small and light items, such as cleaning
cloths made from material or paper,
can be suctioned into the cooktop
extractor. This can damage the fan or
impair the exhaust performance.
Do not store any items or paper on
the cooktop extractor.
CAUTION!
Damage caused by grease and dirt
deposits!
Grease and dirt deposits can prevent
the cooktop extractor from functioning
properly.
Never use the cooktop extractor
without a stainless steel grease
filter.
2.4 Safety Instructions – Installation
The appliance must only be installed and
assembled by trained specialists who are familiar
with and comply with the standard national
regulations and supplementary regulations of the
local utility companies.
Work on electrical components must be
conducted by trained electrical personnel.
The electrical safety of the appliance is only
guaranteed if it is connected to a protective
conductor system that has been installed in line
with regulations. Ensure that this basic safety
precaution is met.
Check the appliance for visible damage prior
to installation.
Do not install any damaged appliance.
A damaged appliance may put your safety at
risk.
Repair and maintenance work may only be
carried out by specialists authorised by the
manufacturer.