User Manual
EN
10
Safety
www.bora.com
2.3  Safety instructions – Cooktop 
extractor
 Do not place any hot cookware on the air inlet 
nozzle of the cooktop extractor.
 Make sure that hot cookware does not touch 
the edge of the air inlet nozzle.
 DANGER!
Risk of smoke inhalation!
Using a replace that depends on the 
air in the room produces combustion 
gases.
If the cooktop extractor is used in 
conjunction with a replace that 
depends on the air in the room, toxic 
combustion gases (carbon monoxide) 
can be extracted from the chimney or 
outlet duct into the living area.
 Make sure that there is always a 
sufficient air supply.
 DANGER!
Fire risk from flambéing!
While the cooktop extractor is working, 
it sucks up grease from cooking. 
Flambéing food can cause the grease 
to catch re.
 Clean the cooktop extractor 
regularly.
 Never work with a naked flame while 
the cooktop extractor is running.
 DANGER!
Fire risk from fat deposits!
If the stainless steel grease lter is 
not cleaned regularly, this can lead to 
increased levels of grease in it. This 
increases the re risk.
 Clean and replace the filter at 
regular intervals.
 CAUTION!
Exposed parts may become hot!
The cooktop extractor and its exposed 
parts are hot when the cooking zone 
is switched on and during the cooling 
phase.
 Please use suitable tools (pot 
holders, oven gloves).
 WARNING!
Risk of injury when opening the 
bottom housing cover!
There is a risk of injury while the fan is 
turning.
 Switch off the cooktop extractor and 
the cooktop.
 Turn off the mains supply.
CAUTION!
Damage caused by objects or paper 
suctioned in!
Small and light items, such as cleaning 
cloths made from material or paper, 
can be suctioned into the cooktop 
extractor. This can damage the fan or 
impair the exhaust performance.
 Do not store any items or paper on 
the cooktop extractor.
CAUTION!
Damage caused by grease and dirt 
deposits!
Grease and dirt deposits can prevent 
the cooktop extractor from functioning 
properly.
 Never use the cooktop extractor 
without a stainless steel grease 
filter.
2.4  Safety Instructions – Installation
The appliance must only be installed and 
assembled by trained specialists who are familiar 
with and comply with the standard national 
regulations and supplementary regulations of the 
local utility companies.
Work on electrical components must be 
conducted by trained electrical personnel.
The electrical safety of the appliance is only 
guaranteed if it is connected to a protective 
conductor system that has been installed in line 
with regulations. Ensure that this basic safety 
precaution is met.
 Check the appliance for visible damage prior 
to installation.
 Do not install any damaged appliance. 
A damaged appliance may put your safety at 
risk.
Repair and maintenance work may only be 
carried out by specialists authorised by the 
manufacturer.










