Operation Manual

96
Electric oven:
Malfunction Possible Cause Solution
Troubleshooting
The (large) oven does not
work.
Neither oven works.
The clock has not been set to
manual.
One or more screws in the
connector block have not been
suffi ciently tightened.
Set the clock to manual; see
chapters about operating
digital/analog clocks.
Open the connection block and
tighten all screws.
Gas Oven:
Malfunction Possible Cause Solution
The spark ignition is not
working.
The burner is diffi cult or
impossible to light.
The burner switches off when
the door is closed.
The oven switches off after
about 10 minutes.
The grill does not work.
The door has not been opened
completely.
The spark ignitor is dirty or dusty.
Because of air movement, the
fl ames near the thermocouple
have been temporarily extinguis-
hed.
The lowest position has not been
set properly.
The gas burner knob has not been
switched to off.
Open the door completely.
Clean the spark plug with a
cloth.
Leave the door open for at
least a minute so that the
thermocouple has been suf-
fi ciently heated.
Contact technical service.
Turn the gas burner knob to
the off position.
Gas Burner:
Malfunction Possible Cause Solution
When I push on 1 knob, all of
the spark plugs ignite.
The burner is diffi cult or
impossible to ignite.
The burner is diffi cult or
impossible to ignite.
The burner is diffi cult or
impossible to ignite.
This is normal.
The spark ignitor is dusty or dirty.
The fl ame distributor ring has not
been placed in the base properly.
The base is not level.
Not applicable.
Clean the spark plug with a
cloth.
Position the fl ame distributor
in such a way that it can no
longer turn and is attached to
the base.
Replace the base and make
sure it is level.