User`s guide

Working with the Motion Stabilizer

515

Corner Pin Tracker

With these exceptions, the parameters in the Corner Pin Tracker’s Search/Target tab are

identical to the corresponding controls in the Motion Tracker filter

• Search/Target Tab (Corner Pin Tracker) on page 515

• Advanced Tab (Corner Pin Tracker) on page 517

• Crop Source Tab (Corner Pin Tracker) on page 519

Search/Target Tab (Corner Pin Tracker)

The Search/Target tab lets you define the four corner pin trackers.

Unlike the Motion Tracker and Motion Stabilizer filters, Corner Pin Tracker must always use

all four trackers and are always on. Analyze All is selected by default. If Analyze All is

deselected, only the active tracker is analyzed. In addition, there is no reason to average

tracker data, since each tracker is used as a corner.

Pivot Point menu (requires

Rotation and Scale option)

Determines which Motion Tracker is used as a Pivot

Point. This point should be the point that you

stabilize to, so it should not scale or rotate and

should be near the rotation axis.

Angle/Scale Point menu

(requires Rotation and

Scale option)

Sets the point that scales or rotates.

Parameter Description

Analyze All option Select to create data for all active trackers when you click the

Analyze button.

Deselect to create data only for the currently selected Tracker tab.

Draw Average option Select to display in the Composite window the average position of

all of the analyzed trackers.