Installation Manual

ManualsBrandsBorla ManualsAutomotiveBorla 11795 Rear Section Exhaust System Kit

BORLA PERFORMANCE INDUSTRIES

701 Arcturus Ave.

Oxnard, Ca. 93033

805-986-8600

TITLE: Toyota Corolla Rear-Section

Installation Instructions

PART NO. A-35493 Rev. A Page 1 of 4

Exhaust System Installation For Toyota Corolla

PN-11795

Thank you for purchasing a Borla Performance Exhaust System.

Borla Performance Rear Section Exhaust System (part number 11795) has been designed for the Toy-

ota Corolla 2.0L/2.4L 4-cylinder engine and automatic or manual transmission.

Borla Performance Industries recommends that an exhaust shop or professional after market parts installer, who has all the neces-

sary equipment, tools and experienced personnel needed for proper installation, should perform the installation of this system.

However, if you decide to perform the installation, we recommend someone should help you. Ensure the installer uses all under

car safety precautions including eye protection.

Please take time to read and understand the following…

By installing your Borla Performance Exhaust System, you indicate that you have read this document and you agree with the terms

stated below.

It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your

Borla Performance Exhaust System

Borla Performance Industries assumes no responsibility for damages occurring from misuse, abuse, improper installation, im-

proper operation, lack of responsible care, or all previously stated reasons resulting from incompatibility with other manufacturer’s

products and/or systems.

Included with your Borla Performance Exhaust System is a warranty card. Please read it carefully before you begin any work on

your vehicle. If you should have any questions regarding our warranty policy, installation, or any other matter pertaining to your

new Borla Performance Exhaust System, please give us a call at the number provided on the warranty card.

Precision manufactured using high quality austenitic stainless steel; this system is designed to endure years of heavy use. Installing

a Borla Performance Exhaust System on your vehicle will eliminate the restrictive design of the stock exhaust, allowing your

engine to discharge exhaust gas easier. The result is more horsepower and torque, longer engine life, and a distinctive throaty

growl- all this, with easy bolt-on installation. These installation instructions have been written to help you in the installation of

your Borla Performance Exhaust System. Please read it completely before installing your system.

These instructions have been written to help you with the installation of your Borla Performance Exhaust System. Please

read this document completely before beginning the installation of your system.

Please compare the parts in the box with the bill of materials provided to assure that you have all the parts necessary for

this installation.

To ensure this part number fits your specific model year, please visit our website for the latest model year listings at

www.BORLA.com.

Summary of content (4 pages)

PAGE 1
BORLA PERFORMANCE INDUSTRIES 701 Arcturus Ave. Oxnard, Ca. 93033 805-986-8600 Exhaust System Installation For Toyota Corolla PN-11795 These instructions have been written to help you with the installation of your Borla Performance Exhaust System. Please Precision using high quality austeniticthe stainless steel; this system is designed to endure years of heavy use. Installing read this manufactured document completely before beginning installation of your system.
PAGE 2
BORLA PERFORMANCE INDUSTRIES 701 Arcturus Ave. Oxnard, Ca. 93033 805-986-8600 Minimum Required Tool List: TOOLS: 1. 3/8” Drive Ratchet 2. 3/8” Drive Extension 3” 3. 13mm Socket 4. Pry Bar SHOP SUPPLIES: 1 Spray Lubricant Borla Performance - Bill of Materials 1 1. Muffler Assembly TITLE: Toyota Corolla Rear-Section Installation Instructions PART NO. A-35493 Rev.
PAGE 3
BORLA PERFORMANCE INDUSTRIES 701 Arcturus Ave. Oxnard, Ca. 93033 805-986-8600 Caution!!! Never work on a hot exhaust system. Serious injury in the form of burns can result If the vehicle has been in use and the exhaust system is hot, allow vehicle to cool for at least 1 hour. Always wear eye protection when working under any vehicle. Note: It is our recommendation that you use a hoist or hydraulic lift to facilitate the installation of your new Borla Performance Rear Section Exhaust System.
PAGE 4
BORLA PERFORMANCE INDUSTRIES 701 Arcturus Ave. Oxnard, Ca. 93033 805-986-8600 Borla Performance Rear Section Exhaust System Installation Figure 3 1. Install muffler assembly into using OE rubber isolators. (See Figure 3) 2. Using original hardware, re-assemble and hand-torque bolts to 18-22 ft. lbs. torque. 3. Check your exhaust for proper clearance under the vehicle and also for tip alignment. (See Figure 4) 4. Start vehicle and check for any leaks.