User Manual

BORLA PERFORMANCE INDUSTRIES
500 Borla Drive.
Johnson City,TN. 37604
805-986-8600
TITLE: Subaru Impreza and XV Crosstrek
Rear-Section Installation Instructions.
PART NO. A-35724 Rev. B Page 3 of 4
Caution!!! Never work on a hot exhaust system. Serious injury in the form of burns can result If the vehicle has been in use and the exhaust system is
hot, allow vehicle to cool for at least 1 hour. Always wear eye protection when working under any vehicle.
Note: It is our recommendation that you use a hoist or hydraulic lift to facilitate the installation of your new Borla Performance Rear Section Exhaust
System.
Taking all under car safety precautions, lift the vehicle using a hoist or hydraulic lift. Once this has been done, you may begin the removal of your old
exhaust system from your vehicle.
Note: Before removing the original exhaust system from your vehicle, please compare the parts you have received with the bill of materials provided
on the previous page to assure that you have all the parts necessary for the installation of your new Borla Performance Rear Section Exhaust System.
Original Exhaust System Removal
Note: With a used vehicle, we suggest a penetrating spray lubri-
cant to be applied liberally to all exhaust fasteners and allowing a
significant period of time for the chemical to lubricate the threads
before attempting to disassemble.
1. Lubricate all the hangers and rubber isolators. (See Figs.1 &
2)
2. Loosen and remove hardware on flange. Keep hardware for re
-installation of your new exhaust. (See Fig.3)
3. Slide and remove hanger from isolators and remove rear muf-
fler.
Figure 2
Figure 3
Figure 1