User Manual

DOCUMENT PART NUMBER

A-35810 Rev. H

INSTALLATION INSTRUCTIONS

Ford F-150 Installaon Instrucons

BORLA PERFORMANCE INDUSTRIES

500 Borla Drive

Johnson City TN, 37604-7523

805-986-8600

PAGE

5 of 6

Original Exhaust

System Removal

1. Unbolt the clamp located in front of the muffler assembly and remove the

hangers from rubber isolators. (See Fig. 1)

2. Using a muffler stand or an additional person to support the exhaust system,

loosen and slide the clamp behind the OE muffler. Remove the hangers from

the rubber isolators and remove the exhaust system from the vehicle. (See

Figs. 2 & 3)

3. Remove the original isolator bracket from vehicle and transfer to your new

Borla system. (See Fig. 4)

4. Remove spare tire from vehicle.

Caution!!! Never work on a hot exhaust system. Serious injury in the form of burns can result If the vehicle

has been in use and the exhaust system is hot, allow vehicle to cool for at least 1 hour. Always wear eye

protection when working under any vehicle.

Note: It is our recommendation that you use a hoist or hydraulic lift to facilitate the installation of your new

Borla Performance Exhaust System.

Taking all under car safety precautions, lift the vehicle using a hoist or hydraulic lift. Once this has been

done, you may begin the removal of your old exhaust system from your vehicle.

Note: Before removing the original exhaust system from your vehicle, please compare the parts you have

received with the bill of materials provided on the previous page to assure that you have all the parts neces-

sary for the installation of your new Borla Performance Exhaust System.

Note: With a used vehicle, we suggest a penetrating spray lubricant to be applied liberally

to all header fasteners and allowing a significant period of time for the chemical to lubri-

cate the threads before attempting to disassemble.