Warranty

16
Borroughs Document Number: DOC-ECM-0001
B
A
Top Shelf
Top Shelf Assembly (Steel Top)
1. If workbench features Guards, remove fasteners that joins their
corners together (both sides).
2. Position Top Shelf Assembly flush against back and sides of the
top.
3. Use holes in bottom flange
of both end panels as a
template to mark on top
where to drill.
4. Set Top Shelf
Sub-Assembly aside to
provide space for drilling.
5. Drill (4), 3/8” diameter holes
through top and frame (both
sides).
6. Reposition Top Shelf
Sub-Assembly and fasten
into place using (4)
screws and (4) nuts.
This completes top shelf
assembly for steel tops.