Warranty

9
Borroughs Document Number: DOC-ECM-0001
K
H
B
A
B
A
Basic Workbench
Caster Assembly
(Skip step for casters)
1. Locate Caster Plate over Leg Foot with plate
flange to outside of workbench.
2. Align holes and fasten together with (2)
Screws and (2) Nuts.
3. Insert the threaded stem of caster through
Caster Plate and Leg Foot.
4. Fasten together with (1) Nut and (1)
Washer.
5. Repeat Steps 1-4 to other (3) casters.
“NOTE” - Casters w/Brakes should be located
on the same end of workbench.
1. Insert Leg Lever into Leg Foot.
2. Align hole and fasten together with (1) Screw and
(1) Nut.
3. Repeat steps 1-2 to other (3) Leg Levelers.
Leg Leveler Assembly
(Skip step for casters)