Installation Guide

17
Borroughs Document Number: DOC-ECM-0001
M
L
1. If workbench features Guards, remove fasteners that joins their corners together (both
sides).
2. Position Top Shelf Assembly flush against back and sides of top.
3. Use holes in bottom flange of both end panels as a template to mark on top where to drill.
4. Set Top Shelf Sub Assembly aside to provide space for drilling.
5. Drill (4), 1/4” diameter holes; 1” deep through top (2 per side).
6. Reposition Top Shelf Sub Assembly and fasten into place using (4) screws and
(4) washers.
This completes top shelf assembly for wood tops.
Top Shelf
Top Shelf Assembly (Wood Top)