Instructions / Assembly

13
Borroughs Document Number: DOC-ECM-0001
Flange
B A
B
A
“NOTE” - Peel off protective film if stainless guards.
Parts List
Item Descripon Qty
1 End Guard 2
2 Back Guard 1
3 Hardware Bag—Guards (ECM-0029) Each consists of (11) , (11) , (11) , (11) fasteners 1
Guards
Guard Assembly (Steel Top)
4. Loosely fasten together with
(3) screws and (3) nuts.
5. Repeat Steps 3-4 for other End Guard.
6. Ensure Assembly is properly aligned
and tighten all hardware.
This completes the guard assembly.
A
B
L M
1. Align Back Guard holes
over holes in back
flange of Top.
“NOTE” - Locate end
flanges to front of
workbench.
2. Loosely fasten together
with (5) screws and
(5) nuts.
3. Align End Guard holes
over holes in side
flange of top.
“NOTE” - End Guard
overlaps Back Guard
flange.