Manualshelf

Instructions / Assembly

ManualsBrandsBorroughs ManualsGarage Storage72 in. W x 36 in. H x 28 in. D Black Steel Adjustable Heavy-Duty Ledge Shelf Workbench
9101112131415161718
14
Borroughs Document Number: DOC-ECM-0001
M
L
B
A
M
L
Guards
Guard Assembly (Wood Top)
1. Position Back Guard with its bottom edge flush
to bottom edge of wood top.
“NOTE” - locate end flanges to front of workbench.
2. Use the holes in Back Guard as a template to
mark on top where to drill.
3. Drill (5), 1/4” diameter holes; 1” deep into top.
4. Loosely fasten together with (5) screws
and (5) washers.
5. Position End Guard with its bottom edge
flush to bottom edge of top and align hole
with hole in Back Guard.
6. Use holes in the End Guard as a template to
mark on top where to drill.
7. Drill (2), 1/4” diameter holes; 1” deep into
top.
8. Loosely fasten together with (2) screws,
(2) washers, (1) screw, and
(1) nut.
9. Repeat steps 5-8 to install other End Guard.
10. Ensure Assembly is properly aligned and
tighten all hardware.
This completes the Guard assembly.
Flange
“NOTE” - Peel off protective film if stainless guards.