Model year 2014 USER MANUAL
WARRANTY Terms and conditions BOS MTB offers warranty on its products on the following terms : BOS MTB guarantees to the original purchaser that the BOS product for which they received this warranty is free from defects in material and workmanship for one year from the date of original retail purchase. A proof a purchase will be asked for any warranty claim. This warranty is not transferable to a subsequent purchaser.
1. INTRODUCTION Thank you for purchasing a Bos Stoy Rare shock. Your shock has been assembled specifically for one bike obviously yours ! - which means that the internal valving and the spring rate are settled for your bike. The adequate mounting kit is also provided with the shock. CAUTION Never try to disassemble your shock. Limit yourself to the instructions given in this manual. This shock is pressurized, for your own safety, do not try to open it.
2.1 Low-Speed Compression (A) The low-speed compression affects the shockâs performance in compression over small bumps or through the beginning of the travel. It can be useful to make the low-speed harder (screw clockwise) on rolling terrain with big compressions and kickers. It can be useful to make the low-speed softer (screw anti-clockwise) on steep slopes. A B 2.2 High-Speed Compression (B) The high-speed compression acts mainly on harsh hits (jump landings, rough rutted sections).
3. MAINTENANCE CLEANING Clean your shock after each ride using a non-aggressive, non-alkaline cleaning product, let it dry then spray with silicon spray and protective grease. Check it regularly and remove any dust/dirt from the bottom-out bumper. Recreational use Racing use Cleaning Oil service After each ride once a year Complete service Every 2 years once a year IMPORTANT The oil service and full service must be performed by a BOS approved center.